CK-001 Tea Extractor
CK-001 Tea Extractor uses a vibration pump for tea extraction. Its listed water supply is filtered water, with an inlet water pressure range of 0-3bar. Compare the boiler, pressure and power requirements below when planning your beverage station.
Price on request
Product specifications
Published model and source-sheet data. Configuration ranges and listed timings depend on the selected version and operating conditions. Source-sheet dimensions are reference measurements, not confirmed current delivery dimensions. Confirm the final configuration, electrical supply and supplied accessories before ordering.
- Model
- CK-001
- Pump type
- vibration pump
- Capacity
- 5L
- Power
- 3000W
- Weight
- 22kg
- Dimensions
- 260 × 625 × 465 (unit and order to be confirmed)
- Extraction pressure
- fixed 9bar
- Inlet water pressure
- 0-3bar
- Water supply
- filtered water
- Voltage
- 110-220V wide-voltage design
CK smart tea brewer series
Consistent tea extraction, from a single cup to batch preparation.
CK smart tea brewers combine a pump system with a smart control module to reproduce a tea master’s technique. Water temperature, time, pressure and flow are controlled precisely, so every batch is bright in colour, clean in aroma and consistent in taste — improving both drink quality and serving speed.
Core features
- Smart extraction programsPreset programs for teas such as green, black and oolong. Select one and the brewer runs the water temperature, time and extraction sequence automatically. Ten cup-volume programs can be stored.
- Professional pump technologyVibration pump: quick start and compact build. Rotary pump: steady pressure, low noise and long service life for a gentler, more consistent extraction. Adjustable pressure: set the pressure to suit delicate green teas or strong, high-pressure brews.
- T3 temperature controlPID control holds water temperature to ±1°C. Boiler (T1), steam (T2) and brew-head (T3) temperatures are set separately to bring out each tea’s aroma.
- Flexible capacityFrom single cups of about 300–500 ml to 2000 cc and 5000 cc batches, covering both peak-hour made-to-order drinks and advance preparation.
- Segmented pressure profilesOn the adjustable-pressure model, set different pressure stages for different teas, recipes and herbal blends to extract deeper flavour and a higher yield.
- Your brand on the machineThe touchscreen interface and the acrylic side-panel logo can be customised for your brand. The menu switches between English and Chinese with one tap.
Appearance and key parts
- 7-inch touchscreen The interface can be changed to show your brand or logo.
- Brew-head handle (brown wood) Loads and removes the tea basket; fitted on every model.
- Round pressure gauge Standard on CK-002, CK-003, CK-004 and CK-005; CK-001 has no gauge.
- Power switch On the right side of the head; the light shows the machine is on.
- Acrylic side panel The logo can be customised for your brand.
- Water inlet at the rear left Marked “Water Enter”; connect a tap-water or purified-water line.
Compare the series
All models: 110–220V wide-voltage design, black and white finish.
| Model | Pump | Capacity | Power | Settings menu | Best for |
|---|---|---|---|---|---|
| CK-001Air This model | Vibration pump | Single cup | 3000W | 3 settings entries | Fast, efficient single-cup extraction. |
| CK-002Pro | Rotary pump | Single cup | 4000W | 3 settings entries | Steadier pressure and gentler extraction for premium single cups. |
| CK-003ProMax | Rotary pump | 2000 cc | 3000W | 10 settings functions | Large-capacity extraction for tea preparation in advance. |
| CK-004Ultra | Rotary pump | 5000 cc | 4200W | 3 settings entries | Stable pressure at 5000 cc for daily commercial volume. |
| CK-005UltraMax | Adjustable-pressure rotary pump | 5000 cc | 4200W | 10 settings functions | Pressure tuned to each tea for professional, customised extraction. |
| CK-C01 | — | Built-in unit | 4000W | — | Space-saving built-in design with a highly integrated, clean finish. |
Basic operation
- Preheat: make sure the tank holds enough suitable water, switch on and wait for heating to finish. Never heat the boiler dry.
- Choose a program such as “Black tea” or “Green tea”. Models with a custom mode also let you set water temperature, extraction time and pre-infusion time.
- Load a measured amount of tea into the brew handle; grind strong teas and herbal blends for better extraction. Place a teapot or measuring cup under the outlet.
- Press Start. The brewer pre-infuses, extracts under pressure and stops automatically. Do not move or open the tea chamber during extraction.
- Remove the tea leaves straight away and rinse the filter basket. Run the cleaning program at the end of each business day.
Installation and safety
- Electrical: the brewer draws high power. Use a dedicated, properly earthed circuit and socket; no power strips or sockets shared with other high-power equipment. Confirm your local mains voltage before installation.
- Water: filtered or purified water is strongly recommended. Untreated tap water causes scale that can block pipes, damage the pump and heater and affect taste.
- Placement: a stable, solid, heat-resistant and well-ventilated level counter with clearance for cooling, away from flammable materials. Built-in models must be installed by a professional.
- Heat and pressure: the boiler, outlet and pipes are hot and pressurised in use. Do not open the cover or touch the outlet while running; cool down and release pressure before draining or cleaning.
- First use: fill the tank with clean water and run one full cleaning cycle without tea. Operators should read the manual and receive basic training.
Product overview
Equipment overview
CK-001 Tea Extractor uses a vibration pump for tea extraction. Its listed water supply is filtered water, with an inlet water pressure range of 0-3bar. Compare the boiler, pressure and power requirements below when planning your beverage station.
A confirmed image for this specification version is being prepared. The equipment remains available for inquiry.
Equipment specifications
| Item | Specification |
|---|---|
| Model | CK-001 |
| Pump type | vibration pump |
| Boiler capacity | 5L |
| Extraction pressure | fixed 9bar |
| Inlet water pressure | 0-3bar |
| Water supply | filtered water |
| Rated power | 3000W |
| Dimensions as supplied | 260 × 625 × 465 |
| Net weight | 22kg |
Dimensions are reproduced in the source order. The new sheet does not state the unit or width/depth/height order; confirm both when preparing the installation drawing. Listed timings and tolerances need confirmation for the intended recipe and operating conditions.
Selection and installation checklist
- Share your menu, intended use and peak-service requirements.
- Check the listed footprint and weight, counter support and service-access space.
- Confirm supply voltage, frequency, plug and electrical circuit suitability for the listed power.
- Confirm the water connection, filtration, drainage and operating conditions for the selected configuration.
Questions before ordering
Which configuration should I choose?
Send the equipment model or configuration, menu and available counter space. Discuss the intended workflow and final specification before placing an order.
Is a price or delivery date fixed on this page?
Request a quotation for the selected equipment, quantity and destination. Confirm packaging, freight, payment terms, availability and lead time in the quotation.
What information should I include in an inquiry?
Include the model, configuration, quantity, destination country, voltage requirements and installation plan. Ask for the applicable manual, spare-parts information and after-sales terms.
Related equipment
-
CK-003 Tea Extractor
Price on request
- Pump type: rotary pump
- Dimensions: 270 × 635 × 510 (unit and order to be confirmed)
-
-